How do you move one CompanyCam project to GeoCliks without disrupting the crew?

Switch from CompanyCam without stopping work: move one live project, invite that crew only and run both apps until it closes. Includes a 7-day plan.

Published · Updated · GeoCliks Field Notes

how to switch from CompanyCam without disrupting the crew

Don't migrate the account. Move one live project. Export what CompanyCam holds for that job, create the same project in GeoCliks, invite only the crew working on it, and have them shoot their next visit there while every other job carries on in CompanyCam. There is no importer, and a photo taken in another app cannot be network-verified after the fact, so the switch is a line drawn at a date, not a data transfer. New accounts get 7 days of the Business plan free with 5 seats and no card, which is enough to run one job and decide.

Most software switches fail on the crew, not the software. Ask twelve people to change the app they open forty times a day, on every job at once, and you get a week of missing photos and a foreman who goes back to the old app. The way around that is to make the switch small enough that nobody has to stop. Pick one project, move one crew, and keep everything else exactly where it is.

Why one project and not the whole account

Moving the photo history buys you less than it seems. GeoCliks has no importer, and even if it had one, an imported photo could not be network-verified. Verification happens when the shutter fires: the capture time is checked against the server, the location and street address are recorded, and the image bytes are sealed with a SHA-256 hash and an HMAC. A photo taken last year in another app missed that moment. Imported, it would be an archive, not an evidence record, and you already have the archive.

So the history stays where it is, and the only question is which new work goes into GeoCliks. Starting with one project keeps the risk small. If the trial goes badly, one crew goes back to an app it already knows.

Pick the right project

The pilot is only as useful as the job you run it on. A good one has these four things:

  • Its next site visit is in the next day or two, so the trial week is spent taking photos, not waiting.
  • Its crew is five people or fewer, the seat count included in the trial.
  • A client, a general contractor or an adjuster is likely to ask when something was done. A job where nobody ever questions a photo will not tell you much.
  • It has no open claim or dispute. Finish those where their earlier photos are, so each before-and-after pair stays in one place.

The move, step by step

  1. Export what you need from CompanyCam. Take the photos and reports for this project that you have to keep, and file them with the job's records. That archive stays exactly as it is, and nothing in GeoCliks depends on it.
  2. Create the GeoCliks account and the project. Sign up, choose job photos when asked which system you run, and create one project named the way your crew already refers to the job. The 7-day Business trial starts now, with no card.
  3. Invite only the crew on that job. Send the invites from the Team screen, then assign those people to this project. A crew member with the field role sees only the projects they are assigned to, so nobody's camera fills up with jobs they do not work on. Invites expire after 7 days, so send them the day before the visit, not a week early.
  4. Check which phones the crew carries before choosing the pilot date. The iPhone and iPad app is on the App Store; Android is not on Google Play yet, so Android crew members would use the browser camera, which needs a connection and does not queue offline captures. Once your crew has access to the app, accept invitations and make test captures before relying on it at a job.
  5. Take the first locked photo together. Shoot something on site, then enter its photo code at geocliks.com/verify on your own phone. You will see what your client will see: the verified time, the GPS position, the street address, and whether the file is the untouched original.
  6. Shoot the rest of the visit as normal. With no signal, capture still works. Photos wait on the phone and upload when it reconnects. They keep their network-verified time as long as the phone checked its clock with GeoCliks in the previous 24 hours.
  7. Send the client something at the end of the visit, either a live share link to the project or a PDF report. That is the test that matters: whether the person on the other side can check what you sent without calling you.

A seven-day plan that fits the trial

DayOfficeCrew on this jobEveryone else
0Export the project's CompanyCam photos; sign up; create the project; send invitesNothing yetCompanyCam, unchanged
1Check the first photo code at /verifyConfirm app access, accept the invite, pick the project, shoot a test visitCompanyCam, unchanged
2–5Watch photos arrive in the project; send the client a share link or a PDFShoot as normal; no-signal photos upload laterCompanyCam, unchanged
6–7Decide: pick a plan, or let the trial lapseShoot as normalCompanyCam, unchanged
The trial runs 7 days from sign-up. Start it the day before the visit so the whole week covers real work.

The last column is the point. For the whole week, nobody outside the pilot crew notices anything.

What stays behind

  • Your CompanyCam history. It stays in CompanyCam, or in the export you took. None of it becomes verified by moving it.
  • Jobs already in progress, apart from the pilot. Close them out where they started, and begin each one's GeoCliks record at its next new phase or its next job.
  • Anything you use CompanyCam for beyond photos and reports, such as payments, marketing, e-signature or room measurement. GeoCliks does not do those. If your team depends on them, that is a reason to keep CompanyCam for that work, whatever the pilot shows.

How to judge the pilot

At the end of the week, ask these questions. Base the answers on the job, not on a demo:

  • Did the crew take as many photos as they normally would? If the count dropped, find out why before moving anyone else.
  • Were any photos marked unverified? Each one tells you something specific: a phone whose clock was changed, or one that had not checked its clock in more than 24 hours.
  • Could the client or the GC open what you sent and check a photo code without an account?
  • Did a PDF or share link replace a step the office used to do by hand?
  • Would any photo from this week have settled an argument you have had before?

If most of the answers are yes, move the next crew the same way, one project at a time. If they are no, you have spent one week on one job and nothing else changed.

What it costs once the trial ends

When the 7 days run out, nothing is deleted. The captures and the project stay, and the workspace drops to the Free plan until you choose one. Free is one seat, 3 projects, 300 captures a month and PDF export of up to 20 photos, with no share links. So the pilot crew needs a paid plan to keep shooting into the same workspace.

Crew sizeCompanyCam, entry priceGeoCliks planGeoCliks price
1$63Plus$7
5$179Business$25
10$324Crew 10$45
25$759Crew 25$105
Monthly prices in USD. CompanyCam's figure is its entry price as listed on 9 October 2026 (from $63 a month for one user plus $29 for each additional user, billed annually), worked out for each headcount.

The shape of the bill matters as much as the total. Per-user pricing goes up with every hire. A flat plan stays the same until you outgrow its seats. Running both apps for a while costs you the GeoCliks plan on top of what you already pay, so keep the overlap to the jobs you are actually moving.

Follow-up questions

Can I import my CompanyCam photos into GeoCliks?
No. GeoCliks has no importer. An imported photo could not be network-verified anyway, because the time, location and seal are checked when the photo is taken, not afterwards. Export what you need from CompanyCam and keep it with the job's records. Start the GeoCliks record at the next visit.
Can the crew use CompanyCam and GeoCliks at the same time?
Yes, and that is the point of moving one project. Neither app depends on the other. The pilot crew shoots their project in GeoCliks, everyone else stays in CompanyCam, and there is nothing to connect or disconnect when the pilot ends.
How long does it take to set up one project?
Plan time to create the account and project, send invitations, confirm app availability and test captures. Setup speed depends on device access and connectivity. The iPhone app is on the App Store and Android is not on Google Play yet; confirm which devices the crew uses before scheduling a mobile pilot.
What happens when the 7-day trial ends?
Nothing is deleted. Captures and projects stay. The workspace falls back to the Free plan, which has one seat, 3 projects, 300 captures a month and PDF export of up to 20 photos, until you pick a plan. For a crew, that means Business at $25 a month for 5 seats, Crew 10 at $45 or Crew 25 at $105.
Does my client need an app to see the photos?
No. Every photo has a code that anyone can enter at geocliks.com/verify in a browser, with no account, to see its capture time, location, street address and whether the file is the untouched original. You can also send a live share link to the project, on Plus and above, or a PDF report.

Capture a verified photo · All Field Notes